MAX32 chipKIT
The ChipKIT MAX32 board from Digilent gives the Arduino community a boost with an 80Mhz 32bit Controller, Offering onboard Ethernet ,USB OTG , CAN, 512K Flash, 128K RAM and a raft of peripheral features all wrapped up in the popular Arduino format. Giving easy access to the peripheral functions via the pin-headers and ready to mezzanine with existing Arduino shields. The IDE being very easy to understand, essentially being again, Arduino compatible and using the same SKETCH environment is supported with plenty of examples in addition to having access to the lively Arduino forum and open source community.
The ChipKIT MAX32 board from Digilent gives the Arduino community a boost with an 80Mhz 32bit Controller, Offering onboard Ethernet ,USB OTG , CAN, 512K Flash, 128K RAM and a raft of peripheral features all wrapped up in the popular Arduino format. Giving easy access to the peripheral functions via the pin-headers and ready to mezzanine with existing Arduino shields. The IDE being very easy to understand, essentially being again, Arduino compatible and using the same SKETCH environment is supported with plenty of examples in addition to having access to the lively Arduino forum and open source community.
Brom
The ChipKIT MAX32 board from Digilent gives the Arduino community a boost with an 80Mhz 32bit Controller, Offering onboard Ethernet ,USB OTG , CAN, 512K Flash, 128K RAM and a raft of peripheral features all wrapped up in the popular Arduino format. Giving easy access to the peripheral functions via the pin-headers and ready to mezzanine with existing Arduino shields. The IDE being very easy to understand, essentially being again, Arduino compatible and using the same SKETCH environment is supported with plenty of examples in addition to having access to the lively Arduino forum and open source community.
Check Out my Brommers Video Blog on this board.
MicrochipRTCfr
Hi,
To take advantage of this board regarding connectivity, you might want to add the chipKit Network shield (note link goes via the RS Country page, choose your country to view)
It brings Ethernet / USB & CAN connectors to the chipKit MAX32.
The protocole libraries are also available.
regards
microguy1
I couldn't find Chipkit Network Shield from Allied Electronics. Is there another place that we can buy Chipkit Network shield for Chipkit Max32. What about expand board? I would like to add relay and switches and LCD on it. I have not got Max32 board yet. I just want to prepare to get all the componets before I can start work on it.
MicrochipRTCfr
Hi,
Digilentinc has also released a new shield called chipKIT Basic I/O Shield for the chipkit family (North America members go here)
It includes :
Regards
MicrochipRTCfr
Hi,
It is available from RS. Which country are you in ?
Regards
microguy1
I am from USA. I checked RS in website and I could not find it. I want to know if third party do sell them?
Reid
Bill Marshall
Here is the link to the RS Components UK web site for the network shield.
Bill
tubelab.com
In the USA just buy the network shield direct from Digilent. They are the manufacturer. I ordered one and got it in about 4 days and I am as far as you can be from them and still be in the US.
http://www.digilentinc.com/Products/Catalog.cfm?NavPath=2,892&Cat=18
microguy1
Thank you for link. Network shield for $54.99. Is there any other place that might sell little cheaper? What about blank board that I can use LCD. I have some LCD that I would like to use it. Is it hard to make own Network board? I have some components that I can use it. Where can we find source code for Max32. I am very new on Max32. I would like to add some I/O for relay switch on 25 volt valves.
Reid
tubelab.com
Digikey and Microchip both sell the same board......for the same price.
I am just starting out here too, but I have some old hardware to play with. I have an Explorer 16 from 2007 which has a small LCD. I ordered a 32 bit chip for the old board and will attempt to get the LCD to work. If succesful, I plan to copy the circuitry over to the contest board that will be used with the Max 32.
Gevo
Digilentinc has also released a new shield:
chipKIT Pmod Shield-Uno™
More info to find here
MONA
what is the simulation software adaptive with designsprak pCB????
pvz
The MAX32 design is availible for download as open source from the Digilent website, at http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,892,894&Pro...
Unfortunately if you use DesignSpark, you need to first open it in Eagle and produce the .eis and .eip files, before you can import it into DesignSpark.
It would be great of Digilent or some-one with Eagle could post these files, so every-one with DesignSpark but not Eagle could use the design in DesignSpark as well.
Thanks.
pvz
DesignSpark design for MAX32 already posted, at http://www.designspark.com/knowledge/corrected-design-files-chipkit-max3...
Thanks