• ARM
• Instrumentation
• LED
• Manufacture
• PIC
• Power
• Test

This and other great measurement tips and tricks can be found at: General Purpose Electronic Test Eqipment Blog.

• Electronic Design
• Instrumentation
• Manufacture
• PIC
• Power
• Test

This and other great power products tips and tricks can be found on the Watt's Up? Blog.

• Analogue
• Communication
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• LED
• Memory
• Microcontrollers
• Microprocessors
• Passives
• PIC
• Power
• Programmable Logic
• Sensors
• Test
• Thermal Management
• Wired

This post and other great tips and tricks for Agilent Power Products can be found on the Watt's Up? blog.

• Analogue
• Audio Applications
• Automotive Applications
• Broadcast Applications
• Communication
• Communication Applications
• Consumer Applications
• Design Phase
• Display & Lighting
• DSP
• Industrial Applications
• Instrumentation
• Interconnect
• LED
• Lighting Applications
• Manufacture
• Medical Applications
• Memory
• Microprocessors
• Military Applications
• Oscilloscopes
• Passives
• Power
• Programmable Logic
• Research Phase
• RF & Wireless Applications
• Robots
• Scientific Applications
• Sensors
• SERIAL
• Standards
• Test

HDO 4000 Oscilloscope 12 bit Vertical Resolution The HDO4000 and HDO6000 Oscilloscopes with HD4096 acquire waveforms with high resolution, high sample rate, and low noise.

• Assembly
• Communication
• Communication Applications
• Design Phase
• DesignSpark Updates
• Ethernet
• Industrial Applications
• Industrial Connectors
• Instrumentation
• Interconnect
• LED
• Manufacture
• PIC
• Power
• Research Phase
• Robots
• Standards
• Test

The fully configurable Motorman solution integrates communication, signal and power for real-time control at higher performance and half the size of current standards.

• Analogue
• Communication
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• LED
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• PIC
• Power
• Programmable Logic
• Sensors
• Test
• Thermal Management

This blog post and other great tips and tricks for Agilent Power Products can be found on the Watt's Up? blog.

• Design Phase
• DesignSpark Updates
• Industrial Applications
• Instrumentation
• Interconnect
• Manufacture
• Power
• Research Phase
• Standards
• Test

The RAPID LOCK connector is a single-pole, quick connect/disconnect replacement for lug connections, used in bus bar and backplane power distribution applications.

• Batteries
• FLASH
• Instrumentation
• Manufacture
• PIC
• Power
• Standards
• Test

This and other great tips and tricks can be found on the Watt's Up? Blog.

• Assembly
• Automotive Applications
• Design Phase
• Industrial Applications
• Interconnect
• LED
• Manufacture
• PCB
• PIC
• Power
• Research Phase

Designed for low-profile power distribution units requiring small form factor connector with high current, the ET power connector is a low loss, highly reliable and cost effective solution for cable-to-pcb applications.

• Circuit Design
• FPGA
• Instrumentation
• Manufacture
• Mbed
• Power
• Test

This and other great measurement tips and tricks can be found on theGeneral Purpose Electronics Test Equipment Blog  Monday, March 26, 2012 Fine Tuning the FPGA Power-on Process Powering on an FPGA can be careful balancing act of proper sequencing and slew rate timing on multiple power supply inputs.

• Design Phase
• Instrumentation
• Manufacture
• PIC
• Power
• Programming
• Research Phase
• Standards
• Test

This and other great tips and tricks on Power Products can be found on Agilent's Watt's Up? blog.

• Assembly
• Manufacture
• PIC
• Power

The SOLARLOK PV4 connector is the sophisticated connectivity solution for thin-film and crystalline panel manufacturers and installers.

• Analogue
• Batteries
• Design Phase
• FRAM
• Instrumentation
• Manufacture
• Power
• Research Phase
• Sensors
• Standards
• Test
• Wireless

This and other great tips and tricks can be found on Agilent's General Purpose Electronic Test Equipment blog.

• Analogue
• Communication
• Design Phase
• Instrumentation
• Manufacture
• PIC
• Power
• Programming
• Research Phase
• Standards
• Test

This blog post and other great tips and tricks on Agilent power products can be found on the Agilent Watt's Up? Blog.

• Design Phase
• DesignSpark Updates
• Display & Lighting
• Industrial Applications
• LED
• Lighting Applications
• Power
• Test

A New CAD tool on the Internet for Switching Power Supplies PowerEsim- Free on-line switch mode power supply SMPS, circuit and transformer design, calculation, simulation software.

• Analogue
• Communication
• Design Phase
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• PIC
• Power
• Programmable Logic
• Research Phase
• Sensors
• Standards
• Test
• Thermal Management

For more information on Agilent Technologies Frequency Counters visit: www.

• Automotive Applications
• Communication
• Communication Applications
• Design Phase
• DesignSpark Updates
• Development Kits - Electronics
• Industrial Applications
• Instrumentation
• Interconnect
• Manufacture
• Mbed
• Microprocessors
• Military Applications
• Research Phase

MULTIGIG RT product is a backplane interconnect family that offers levels of flexibility and customization never before seen in the industry.

• Analogue
• Communication
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Sensors
• Test
• Thermal Management
• Wireless

Trying to design your wireless device to maximize battery run-time or qualify the right battery to actually deliver maximum capacity? Attend this webcast series to learn the latest measurement techniques for gaining greater insights on optimizing battery-run time.

• 720
• Assembly
• Design Phase
• Industrial Applications
• Interconnect
• PIC
• Research Phase
• Test

Connecting ICD3 to Target Systems Often, especially when using Surface mount devices, there is insufficient room to put a standard RJ11 connector on the target board.

• Batteries
• Instrumentation
• Power
• Test

A key consideration when powering a mobile device with a DC source is getting current drain test results comparable to that of using a battery, when optimizing battery run-time.

• Manufacture
• Medical Applications
• Power
• Test

SCHURTER expands on its standard range of V-Lock power cords to include two types designed to ensure patient safety in critical medical and dental applications.

• Communication
• Communication Applications
• Consumer Applications
• DesignSpark Updates
• Ethernet
• Industrial Applications
• Interconnect
• Manufacture
• PCB
• Power
• Standards

TE Connectivity’s SFP+ direct attach copper cable assemblies are a high speed, cost effective alternative to fiber optics in 10Gb Ethernet, 8Gb Fibre Channel and InfiniBand applications.

• Instrumentation
• Power
• Test
• Wireless

Battery run-time in mobile devices can be validated most precisely when loaded with actual dynamic current demands rather than testing with an average current level.

• Consumer Applications
• Interconnect
• PCB
• Power

November 23rd 2012 TE Connectivity is pleased to introduce a new product family of connectors called STRADA which means "road or path" and is part of our commitment to develop customer focused next generation interconnect solutions for the future.

• Instrumentation
• Manufacture
• Power
• Test

Visit the Agilent Watt's Up? Power blog for tips on power products selection, usage, specifications, and design.

• Arduino
• Communication
• Design Phase
• Development Kits - Electronics
• Education & Learning Applications
• Microcontrollers
• Power
• RF & Wireless Applications
• SERIAL
• Test
• Wireless

Radio: It’s Just 2 easy! Rick Winscot of US company Quilix has married together two ‘easy’ technologies by developing an Arduino ‘shield’ for the LPRS “easyRadio Advanced” low power radio modules.

• Communication
• Communication Applications
• Consumer Applications
• Design Phase
• Development Kits - Electronics
• Ethernet
• Human Machine Interface
• Industrial Applications
• Interconnect
• LED
• Lighting Applications
• Manufacture
• OLED
• PIC
• Power
• Raspberry Pi
• Research Phase
• Robots
• Sensors
• SERIAL
• Test
• WiFi

Just plug the RasPiComm on the GPIO header of your Raspberry Pi and start using advanced features like a realtime clock (your Raspberry Pi won't lose time when powered down), a 5-way joystick, outputs and two serial ports (RS-232 and RS-485). Directy control a display, a stepper motor controller or relays and much more!

• Automotive Applications
• Communication Applications
• Consumer Applications
• Design Phase
• Industrial Applications
• Manufacture
• Passives
• Power
• Test

 Circuit conditioning examines solutions for challenges in modifying voltage or current, such as noise filtering or voltage converters.

• Instrumentation
• Power
• Test

Agilent's N8700 series programmable DC power supplies are designed for easy integration into a system.

• Batteries
• PIC
• Power

See the dynamic current profile of a battery powered device being recorded analysed and even played back using the N6705B with the N6782A module, The N6705B is first used to power the device a camera - you can see the current used in several states and even measure the amp hours needed to take a picture.

• Communication
• Communication Applications
• Consumer Applications
• Design Phase
• Development Kits - Electronics
• Ethernet
• Industrial Applications
• Interconnect
• LED
• Lighting Applications
• Manufacture
• Microcontrollers
• Microprocessors
• Power
• RENESAS
• RL78
• Sensors
• Standards
• Test

Overview Networked Intelligent buildings are becoming a growth industry driven by the need to be green and conserve energy.

• Manufacture
• Power

FMER SOL - SCHURTER presents new model 2300 A and variants without Y-capacitors.

• Broadcast Applications
• Communication
• Communication Applications
• Design Phase
• DesignSpark Updates
• Industrial Applications
• Manufacture
• Power

Exar's New XRP6670 Delivers 3Amps of Current with 2.

• Analogue
• Communication
• Design Phase
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Research Phase
• Sensors
• Standards
• Test
• Thermal Management

This posting and other great tips and tricks for your General Purpose Instruments can be found on Agilent's General Purpose Electronic Test Equipment blog.

• Assembly
• Design Phase
• DesignSpark Updates
• Display & Lighting
• Industrial Applications
• Interconnect
• LED
• Lighting Applications
• Manufacture
• Research Phase
• Solder

TE Connectivity provides a broad range of solderless LED holders that provide fixture designers an easier way to integrate LEDs into their designs.

• PCB
• Power
• Solder
• Test

December 14th 2012 Multi-Beam XL™ from TE Connectivity has become a de-facto standard for modular hot-swappable power distribution connection systems.

• Analogue
• Communication
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Sensors
• Test
• Thermal Management

The Agilent Test-System Development Guide is a comprehensive handbook for test engineers who need to maximize performanceand flexibility while minimizing cost and complexity.

• Broadcast Applications
• Communication
• Communication Applications
• Consumer Applications
• Design Phase
• Development Kits - Electronics
• Education & Learning Applications
• Industrial Applications
• LED
• Lighting Applications
• Medical Applications
• Microcontrollers
• Passives
• PIC
• Power
• Research Phase
• RF & Wireless Applications
• Robots
• Sensors
• Standards
• Wireless

This PowerPoint presentation -- assembled by the Anaren Integrated Radio (AIR) team, with significant content courtesy of Texas Instruments -- serves as an overview of the parameters and considerations a designer would use to select a low-power wireless (LPRF) solution.

• Design Phase
• Manufacture
• PIC

We are pleased to announce a new feature that has been added to the Bourns websiteData Sheet Search – Product Technology for access to 3D and SPICE Model fi les.

• Communication
• Communication Applications
• Design Phase
• Designspark PCB
• FRAM
• Industrial Applications
• Interconnect
• Manufacture
• Power
• Research Phase
• Standards
• Test

AMP Power Series connectors provide a durable, quick connect/disconnect means to transmit "power" levels of current and voltage (15-275 A, 600 V AC/DC).

• Analogue
• Audio Applications
• Automotive Applications
• Broadcast Applications
• Clean Technology
• Communication
• Communication Applications
• Consumer Applications
• Design Phase
• DesignSpark Updates
• Development Kits - Electronics
• Display & Lighting
• DSP
• Education & Learning Applications
• Green/Environmental Applications
• Human Machine Interface
• Industrial Applications
• Instrumentation
• Interconnect
• Lighting Applications
• Manufacture
• Medical Applications
• Memory
• Microcontrollers
• Microprocessors
• Military Applications
• Passives
• Power
• Programmable Logic
• Research Phase
• RF & Wireless Applications
• Robots
• Scientific Applications
• Sensors
• Standards
• Test
• Thermal Management

Nowadays, air pollution is very common and severely influenced to Hong Kong people.

• Instrumentation
• LED
• Manufacture
• Test
• Wired

This information and other great tips and tricks can be found at:  The General Purpost Electronic Test Equipment Blog Friday, January 6, 2012 Triggering a DMM with No Hands  Making a DMM measurement on a really really small pin on a chip is not an easy task.

• Manufacture
• Power
• Reflow
• Solder
• Switches

SCHURTER is expanding its successful DKFS family of SMD chokes with a new horizontal version.

• Analogue
• Communication
• Design Phase
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Research Phase
• Sensors
• Standards
• Test
• Thermal Management

This and other great tips and tricks can be found on Agilent's Watt's Up? Blog.

• Instrumentation
• Power
• Test

This video will demonstrate the safe-start and auto-start setting available on the Agilent Technologies N5700 series of DC Power Supply.

• ARM
• Manufacture
• Memory
• Oscilloscopes
• PIC
• Power
• RS232
• Scientific Applications
• SERIAL
• Test

• Assembly
• Consumer Applications
• Design Phase
• Industrial Applications
• Interconnect
• LED
• Lighting Applications
• Manufacture
• Power
• Solder
• Test

The TE Solderless LED Holder, Type Z50, is a circular LED holder that provides a quick and easy solderless connection to the Philips Lumileds LUXEON K 12 and 16 LED array families.

• Analogue
• Communication
• Design Phase
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Research Phase
• Sensors
• Standards
• Test
• Thermal Management

Agilent Technologies was an active participant in the NCSLI 171 subcommittee that authored the Z540.

• ARM
• ARM7
• Capacitors
• Communication
• Design Phase
• DSP
• dsPIC
• EEPROM
• Linear Regulator
• Manufacture
• Memory
• PIC
• PIC32
• Power
• Solder
• Switches
• Test

• Analogue
• Communication
• Design Phase
• Display & Lighting
• DSP
• Human Machine Interface
• Instrumentation
• Interconnect
• Manufacture
• Memory
• Microcontrollers
• Microprocessors
• Passives
• Power
• Programmable Logic
• Research Phase
• Sensors
• Standards
• Test
• Thermal Management

Counters can be a plug and play instrument and seem fairly simple from the outside.